Oval Rings

YouTube · Post by **Garoslaw** » Tue May 01, 2012 6:44 pm

[19:37:07] Garochu: http://i966.photobucket.com/albums/ae14 ... spirit.png" onclick="window.open(this.href);return false; < So I am making some attack
[19:37:25] Garochu: to make that ring, i had to time it right
[19:37:52] Garochu: is there a way to do it without timing

The stuff that's above. I'd be great to know if there were a solution.

Post by **TheBlueEcho** » Tue May 01, 2012 7:30 pm

Hyphen wrote:
Garoslaw wrote:[19:37:07] Garochu: http://i966.photobucket.com/albums/ae14 ... spirit.png" onclick="window.open(this.href);return false; < So I am making some attack
[19:37:25] Garochu: to make that ring, i had to time it right
[19:37:52] Garochu: is there a way to do it without timing
The stuff that's above. I'd be great to know if there were a solution.
Be more specific.

this.

Edit: also: http://notepad.cc/share/C69xh0Rg1C" onclick="window.open(this.href);return false;
(Yes i know it could be better.)

YouTube · Post by **Garoslaw** » Tue May 01, 2012 7:47 pm

What I meant was:

-To make that oval thing with rolling panels, I had to be timing specific. As in, Time when another Rolling panel starts, that will start a chain, that will create something like shown in that picture above after some time.

-I wanted to find a way to do that Without proper timing method, and to make an instant oval.

However i have no idea how to execute something like that.

P.S.: TBE, I used a similar method. All I did is make three Rolling panels, Set the first one on Move action 9, and the other two on 10. The Second one's BP Dist. and the 3rd one's Center Dist. define the oval the way it should, as in, How wide and how open the oval pattern is. but i think that's the same method, yes? Because that's How I did This with an additional use of a move joint.

You can make 2 instances like that, but not more. and i am saddened.

Post by **TheBlueEcho** » Tue May 01, 2012 10:29 pm

Just so that I understand:

You want a oval that starts with one "light" then extends into n "lights". But you want it without all the timing calculations involved (or more appropriately, less timing).

The First half of that sentence is possible, the seconded half i'm not so sure.

Post by **PureQuestion** » Wed May 02, 2012 12:21 am

http://www.mediafire.com/?p7rq36s50ddy7fy" onclick="window.open(this.href);return false;

Are you trying to do this

Post by **TheBlueEcho** » Wed May 02, 2012 12:26 am

Shoutbox wrote:TheBlueEcho « Tue May 01, 2012 6:11 pm » http://snipurl.com/23bmr8m" onclick="window.open(this.href);return false; [sebsauvage_net] Fraxy Oval
...
TheBlueEcho « Tue May 01, 2012 6:22 pm » *speed/move
TheBlueEcho « Tue May 01, 2012 6:22 pm » in the speed param. (ex2)
TheBlueEcho « Tue May 01, 2012 6:22 pm » Take you time examining that, then. Try to understand the math behind the rolling/counter rolling parts and the Move/counter move parts, ok? (it's very simple math)

YouTube · Post by **Garoslaw** » Wed May 02, 2012 12:28 am

That's exactly it! @Pure&TBE

Thanks, Now I understand a bit more how that works.

Post by **TheBlueEcho** » Wed May 02, 2012 4:42 am

Fine tuned it and included another one + generic oval (the one PQ showed you).
Edit: and a rotating one. you'll see what I mean.

Oval Rings

Oval Rings

Re: Oval Rings

Re: Oval Rings

Re: Oval Rings

Re: Oval Rings

Re: Oval Rings

Re: Oval Rings

Re: Oval Rings